000 01663 a2200277 4500
003 UNISSA
005 20241112121745.0
008 241112b |||||||| |||| 00| 0 eng d
020 _a085954091X (paperback)
040 _aUNISSA
_beng
_cUNISSA
_erda
050 _aTP331
_bP33
100 _aPaddon, A. R.
_eAuthor
245 _aThe production of charcoal in a portable metal kiln /
_cby A. R. Paddon and A. P. Harker
264 0 1 _bTropical Products Institute
_c1979
_aLondon :
264 0 4 _c©1979
300 _aiii, 28 pages ;
_bIllustrations ;
_c30 cm
336 _2rdacontent
_atext
337 _2rdamedia
_aunmediated
338 _2rdacarrier
_avolume
500 _aIncludes tables
505 _aCharcoal production trials have been carried out in the Forest Products and Fuel Technology Section of the Institute using a commercially available portable metal kiln. As a result of these trials, considerable expertise has been acquired and a modified design of kiln has been developed which officers from the Section have used to carry out training programmes in developing countries, under the Technical Co-operation programme. This report gives details of typical data obtained during the operation of the kiln using cordwood at moisture contents ranging between 27 and 38% (wet basis) and compares it with results from one run using coconut shell as the raw material. The methods of operating the kiln when lit from the top and bottom of the charge are described and the advantages of each of the two methods are discussed.
650 _aProduction of Charcoal
650 _aCharcoal
700 _aHarker, A. P.
_eAuthor
942 _cSINAUT
_2lcc
999 _c39804
_d39804